The OBD2 computer model T06 is an electronic device that allows you to access vehicle data (multi-brand).
Supported vehicle data:
1. Read error diagnostic code. Data flow: Reads and displays live ECU/PCM data flow, graphically plotting functions, and storing frozen frame data.
2. Delete fault code (delete error code and turn off the MIL). Code erasing and restart: Turn off the engine control light (MIL), clear codes and restart monitors.
3. RPM of the engine.
4. Calculated load value.
5. Refrigerant temperature.
6. Fuel system status. I/M readiness status: Shows whether the vehicle's various emissions-related systems are functioning properly and ready for inspection and maintenance tests.
7. Vehicle speed.
8. Short-term fuel condition.
9. Long-term fuel condition.
10. Pressure of the intake manifold.
11. Injection lead time.
12. Admission temperature.
13. Air flow speed.
14. Test EVAP.
15. Absolute position of the accelerator.
16. Oxygen detection voltage associated with short-term fuel condition.
17. Fuel system status.
18. Fuel pressure.
19. Curve In Real Time.
20. Monitoring of fuel consumption, etc. Battery voltage reading. View freeze frame data. Sensor test: check the vehicle conditions that are recorded by the on-board computer at the time the emission-related failure occurs.
21. Read vehicle information: Display information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration Verification Number), etc.
More than 200 data streams.
More than 3600+ DTC Look-up.
Specification:
Working voltage: 9V-16V
Working current: about 50 mA.
The OBD2 connecter model T06 is an electronic device that allows you to access vehicle data (multi-brand).
Supported vehicle data:
1. Read error diagnostic code. Data flow: Reads and displays live ECU/PCM data flow, graphically plotting functions, and storing frozen frame data.
2. Delete fault code (delete error code and turn off the MIL). Code erasing and restart: Turn off the engine control light (MIL), clear codes and restart monitors.
3. RPM of the engine.
4. Calculated load value.
5. Refrigerant temperature.
6. Fuel system status. I/M readiness status: Shows whether the vehicle's various emissions-related systems are functioning properly and ready for inspection and maintenance tests.
7. Vehicle speed.
8. Short-term fuel condition.
9. Long-term fuel condition.
10. Pressure of the intake manifold.
11. Injection lead time.
12. Admission temperature.
13. Air flow speed.
14. Test EVAP.
15. Absolute position of the accelerator.
16. Oxygen detection voltage associated with short-term fuel condition.
17. Fuel system status.
18. Fuel pressure.
19. Curve In Real Time.
20. Monitoring of fuel consumption, etc. Battery voltage reading. View freeze frame data. Sensor test: check the vehicle conditions that are recorded by the on-board computer at the time the emission-related failure occurs. Visualisation and recording of data graphs, frozen frame.
21. Read vehicle information: Display information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration Verification Number), etc.
More than 200 data streams.
More than 3600+ DTC Look-up.
Specification:
Working voltage: 9V-16V
Working current: about 50 mA.
Main control chip: APM32E103VET6, LQFP100
Working voltage: DC 9V~16V
Working current: 34mA~51mA
Standby current: 30mA
Communication method: serial communication.
Communication between the UCE and the diagnostic equipment or instrument is established through a protocol (language).
Supported protocols:
SAE J1850 PWM (41.6 Kbaud).
SAE J1850 VPW (10.4 Kbaud).
ISO 9141-2 (initialisation at 5 bauds, 10.4 Kbaud).
ISO 14230-4 KWP (initialisation at 5 bauds, 10.4 Kbaud).
ISO 14230-4 KWP (rapid initialisation, 10.4 Kbaud).
ISO 15765-4 CAN (11-bit ID, 500 Kbaud).
ISO 15765-4 CAN (29-bit ID, 500 Kbaud).
ISO 15765-4 CAN (11-bit ID, 2500 Kbaud).
ISO 15765-4 CAN (29-bit ID, 250 Kbaud).
Note: Supports cars of American brands produced after 1996, cars of European brands produced after 2002, cars of Japanese brands produced after 2005 and cars of Chinese brands produced after 2008. The number of data elements supported varies according to the year of the model, and the actual support situation should be consulted.
Know the real breakdown of the car with this on-board computer with functions of reading and/or erasing OBDII type failures for cars and the like.
Scan tool, clear codes, easy to use, Universal version. Avoid surprises with the workshop or mechanic, delete the fault yourself to pass the ITV. Discover the problem and solve it. Save money and time.
The signal that the sensors send to the UCE, in most cases, is complex, each of the sensors must be checked through the self-diagnosis connecter.
No battery or charger is required, simply connecting to the car's OBDII port will show you if the car has been manipulated before buying it.
The electronic control unit not only electronically controls the ignition instant, but must also control and manage the injection so that the stoichiometric ratio is always within the optimal value, defined in phase within the tuning, in order to limit the consumption of exhaust gases and optimise the thermodynamic performance of the engine and, with programmed characteristic diagrams, controls the impulses for the electroinjector and the ignition instant.
Ideal for individual car owners and frequent drivers who need to identify and solve vehicle problems to ensure safe driving.
Perfect for the maintenance of vehicles for personal use, maintenance operations and effective problem solving in vehicles.
It is also optimal for repair shops, car technicians and maintenance centres that offer professional repair and maintenance, as it provides accurate diagnostics and maintenance suggestions.
8 Languages allowed including Spanish.
Green light: helps to detect the vehicle.
Yellow light: it is read that the vehicle is defective.
Red light: the product is energised normally.
Displays current engine data: engine revolutions per minute, load value, refrigerant temperature, fuel system state, absolute position of the vehicle speed accelerator, oxygen detection voltage associated with short-term fuel state, fuel system state, fuel pressure.
It gives many other data to control fuel consumption.
Size: 169*90*23 mm
Screen: 2.8 Inches
Weight: 270 g
Includes: Box, OBD2, Manual.
